The atmosphere contains water vapour,hydrocarbons and solid particles(about 140 million solid particles per cubic metre of air found in the atmosphere),These impurities are inhaled into the air compressor and then entered to the compressed air network together with residual lubricant.
Failure to treat these contaminants in a timely manner,it will lead to corrosion of pipelines,endangering production equipment, harming tool sensitivity and lifespan, which will
eventually affect the products quality.
High effiency line filter for compressed air
The filter (air compressor) is used to remove impurities such as oil, moisture and dust in the compressed air. Different application occasions have different requirements for air source filtration. The filters are divided into primary filters, secondary filters and high efficiency filters. The primary filter, also known as the simple filter, is placed in the air compressor station after the dryer, commonly used filters, felts, silica gel, coke and other materials for adsorption and filtration, and its dust filtering efficiency is 50% to 70%.
The secondary filter, also known as the water separator, is the most widely used in pneumatic systems, and its dust filtering efficiency is 70% to 90%. High-efficiency filter is a precision water filter with a small filter element aperture. It is often used in pneumatic sensors and detection devices. It is installed after the secondary filter as the third stage of filtration, and its ash filtration efficiency reaches 99%
1.For a variety of air compressors, air dryers supporting the use;
3.the body configuration, with an innovative design
4.increase of efficiency and reduction of productions stops
5.reduction of maintenance costs
6.tool and machinery protection